Javascript Menu by Deluxe-Menu.com
Balance and Vibration Engineering

CS 30

Balancing Machine for Crankshafts

  • Modular construction
  • Integral drilling station with linear guide mechanism
  • Software controlled display of drilling depth, tolerance calculation and indexing aid
  • High-performance CAB 700 or CAB 803 Measuring instrumentation
  • Permanent calibration

Range of application

CS 30 crankshaft balancing machines are conceived in particular for low-volume production and overhaul shops. The CS 30 is a hard-bearing machine with permanent calibration. This means that a new rotor can be mounted easily and balanced after entering only a few geometrical rotor data.
The integrated measuring instrumentation directly displays unbalance with amount and angular position, depending on the initial unbalance of the rotor.

CS 30 balancing machines are suitable for rotors weighing up to 700 kg. A powerful underslung belt drive ensures short acceleration periods for short balancing cycles. The machine's compact and sturdy design concept provides for a small footprint.

CS 30 balancing machines can be used with the CAB 700 or CAB 803 measuring instrumentation and can also be equipped with a report printer.

A further advantage of the CS 30 balancing machine lies in its area universal applicability. The machine is also suitable for other rigid rotors provided that they do not exceed the geometrical limits of the machine.

Unbalance correction is performed directly on the CS 30 by a highperformance drilling unit. There is therefore no need to remove the work-piece from the machine and install it on a separate correction unit.
Further information
Contact

Don Bailey

E-Mail
Add to list of marked products

Use of cookies
Cookies enable the best possible provision of our services. By using our pages and services you agree that we use cookies.
Link to the Schenck RoTec data protection declaration

OK